Features

  • PID temperature controller
  • Anti-condensation heated door
  • Values can be observed in charts
  • Faster recovery rate of temperature and CO2 concentration with help of circulating fan after door opening
  • HEPA filter for effective filtration of microorganisms
  • Easily replaceable filter outside the chamber for gas inlet that filters the gas entering the chamber
  • Inside glass design and 3 shelves come as standard accessory
  • Stainless steel chamber for easy cleaning
  • Easily removable water tray
  • Safety features including various types of alarm CO2 concentration alarm, high-low temperature alarm, low water level alarm (optional), O2 concentration alarm (optional) and door open alarm

Air Jacketed CO2 Incubator LD-LAJI-D10

Air Jacketed CO2 Incubator LD-LAJI-D10 delivers the environment needed to grow biological or cell cultures. PID temperature controller. It comes with 80 L capacity, and RT+3 to 50 °C temperature range with 0.1 to 20% CO2 control range and optional O2 control. It comes with 7-inch touch screen display for observing parameters such as real time temperature display, alarm, operating status, CO2 concentration, O2 concentration (optional), humidity (optional).

SKU Code: LD-LAJI-D10

Also Available in below capacities

Alarm CO2 concentration alarm, high & low temperature alarm, door-opening alarm, humidity alarm, low water level alarm (optional), O2concentration alarm (optional)
Noise < 50 dB
Power <60W/H (37 °C)
Display 7” touchscreen
Capacity 170 L
Disinfect 180 °C high temperature disinfection
CO2 Sensor Dual IR sensor
Convection Fan
Access Port ⌀ 30 mm
HEPA Filter Filter 99.97% of 0.22 μm foreign particles
CO2 Accuracy ±0.1 %
CO2 Pressure 0.1 MPa
Power Supply 110V/220V 50/60HZ
CO2 Connector 8 mm tube (inner diameter)
Data transfer USB, Ethernet port
Heating Method Direct heat + Air jacket
Upgrade method Wireless or Cable
Heat Insulation Foam
Outer Dimension 718 x 744 x 956 mm
Chamber Humidity 95 ± 5% R.H. (Relative Humidity)
Temperature Range Ambient +3 °C – 55 °C (ambient: 5 °C ~ 35 °C)
Internal Dimension 557 x 518 x 597 mm
Inner Door Material Tempered glass
Temperature Controller PID
CO2 Concentration Range 0.1 – 20 %
Weight (accessories excluded) 80 kgs
Temperature Stability at 37°C ±0.1 °C
Temperature Uniformity at 37°C ±0.3 °C
Power (high temperature sterilization) <1500W/H (180 °C)
Temperature Recovery Time (recover to 37°C after 30s door-opening) < 5 minutes
CO2 Concentration Recovery Time (recover to 5% after 30s door-opening) ~ 4 minutes
Air jacketed CO2 incubators are widely used for a broad range of applications that includes: Tissue engineering, In vitro fertilization, Neuroscience, Cancer research, Stem cell research, Regenerative medicine, Mammalian cell research.

Similar Products