DIN abrasion testerLD-TDAT-A10determines abrasion resistance of rubber made products, natural rubber, vulcanized rubber, thermoplastic amorphous polymers to withstand the long term damage as a result of friction due to its excessive use. The ratio between standard loss of rubber material & test rubber material, expressed in percentage, marks the abrasion resistance index of sample under test.
SKU Code: LD-TDAT-A10
| Idler | 150 mm |
| Stroke | 20 m/ 40 m presetting |
| Dimension | 950 × 660 × 310 mm |
| Net Weight | 75 kg |
| Return form | Electric automatic reset |
| Shift screw | 6 teeth/ inch |
| Power supply | 220 V, 50 / 60Hz |
| Set rotation | 84 rotation of 40 meters |
| Specimen size | Diameter 16 mm, thickness at least 6 mm |
| Limit rotation | 85 rotate |
| Abrasion stroke | 40 ± 0.2 M |
| Test arm weight | 2.5 N |
| Additional Loads | 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N, |
| Measurement mode | Auto/ manual presetting |
| Idler wheel speed | 40 ± 1 rpm |
| Horizontal displacement | 4.2 mm/ rotation |
| Emery cloth specifications | 60 # seam is less than 2 mm |
| Grips lateral displacement | 4.2 ± 0.04 mm/ rotation |
| DIN abrasion tester is used to determine the abrasion resistance of elastomers by the frictional loss of the rubber in products such as tires, conveyor belts, hoses, footwear, floor covering, thermoplastic amorphous polymers etc. |
