Deionized Water System LD-LDIN-A20 is water system type economic choice of deionized water for general grade experiments. Designed with LCD controlling system, 2 way water quality sensors, timing and quality dispensing, single stage RO system, 1 pump, and built-in 12 liters tank. Its output ranges from up to 30 liters/hour and offers flow rate up to 2 liters/minute (with pressure tank). Features with tap water inlet, it can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 97%, and the deionized water’s resistivity is more than 16 MΩ.cm, near to 18.2 MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. Offers 3 kind of status lamp-running, alarm and full water, convenient to know system status. It is auto self-flushing of RO mem
SKU Code: LD-LDIN-A20
| Output | 30 liters/hour |
| Weight | about 18 kg |
| Dimension | 340 × 500 × 560 mm |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Power Supply | AC100 to 240 V, 50/60 Hz |
| RO Water Quality | Ion rejection rate: 97 % to 99% (new RO membrane); Organic rejection rate: >99 %, when MW >200 Dalton; Particles and bacteria rejection rate: >99 % |
| Power Consumption | 72 W |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Standard configuration | Main body (Including 1 set of cartridge) +12 liters pressure tank |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm; Bacteria: N/A; Particle (>0.1 µm): N/A |
| Feed water requirements | Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2 |
| Deionized Water System is used in general chemical or biological experiments to obtain deionized and RO water across Healthcare, Food & Beverage and Biochemistry microanalysis etc. |
