Water Purification SystemLD-LWPS-A10is a Type I water treatment system and the feed water is RO or distilled water. It mainly consists of pretreatment system, RO system, ultrapure water system conveying unit and control system. It consists of 254 nm UV lamp to remove the bacteria in the system and 185nm UV lamp to reduce TOC. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.
SKU Code: LD-LWPS-A10
| TOC | < 5ppb |
| DNases | < 4 pg/μl |
| RNases | < 0.01 ng/ml |
| Bacteria | < 0.1 cfu/ml |
| Humidity | 10 % ~ 80 % |
| Particle | ( > 0.22μm) <1/ml |
| Endotoxin | < 0.001 EU/ml |
| Absorbance | (254nm,1cm optical distance) < 0.001 EU/ml |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| Temperature | 5 ℃ ~ 40 ℃ |
| Power supply | 230 V/50 Hz 150 W |
| Water quality | One stage (Type I) |
| Micro filtration | Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter |
| Reactive Silica(SiO2) | < 0.01 ppm |
| Water production rate | Type 1 water flow rate: 1-1.5 L/min |
| Main body Dimension (L × W × H) | 340 × 550 × 530 mm (bench type) |
| Used for Medical device injection to human body, DNA/RHA preparation, DNA testing, HPLC (test and analysis of amino acid, penicillin; Organic ingredients), GCMS, ICP, IC, gas chromatography, AAS etc. |
