Portable Conductivity MeterLD-LPCM-A12is adapted with different modes for measuring quality of water on parameters such as conductivity, salinity and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.
SKU Code: LD-LPCM-A12
| Power | 3 × 1.5 V AA batteries or DC 5 V power adapter |
| Memory | 500 data sets |
| Weight | 300 g |
| Salinity | |
| Connector | 6 pin mini plug |
| Data hold | Manual or auto-end point |
| Temperature | |
| Conductivity | |
| Cell constant | K= 0.1, 1, 10 or custom |
| Power Control | Manual or Automatic (10, 20 or 30 minutes after last key pressed) |
| Calibration due | 1 to 31 days or off |
| Salinity accuracy | ±1% F.S |
| Salinity resolution | 0.01, 0.1, 1 |
| Stability conditions | Low or high |
| Reference temperature | 20 °C or 25 °C |
| Conductivity accuracy | ±0.5% F.S |
| Temperature resolution | 0.1 °C, 0.1 °F |
| Conductivity resolution | 0.001, 0.01, 0.1, 1 |
| Dimension (L × W × H) | 170 × 85 × 30 mm |
| Temperature coefficient | Linear and Pure water compensation |
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| Salinity measurement modes | Practical Salinity (psu) or Natural Seawater (ppt) |
| Temperature calibration points | 1 point |
| Temperature measuring accuracy | ± °0.5 C, ± 0.9 °F |
| Conductivity calibration points | 1 to 5 points |
| Conductivity calibration solutions | 10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom |
| Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area. |
